Products & Markets - Pulp & Paper and Forest Industries

The Pulp & Paper and Forest Products Industries impose some of the most rigorous demands on their process equipment - pumps and compressors are no exception. Many pumping applications involve corrosive chemicals and fibrous solids, air compressor and blower services are demanding and plant locations are often remote.

Listed below is a summary of the efficient, reliable products we represent to solve these demanding applications. Many of these products utilize innovative technology and all are produced by world-class manufacturers and backed up by our parts and service personnel operating from six facilities across Canada. Detailed information is available upon request.

For over 30 years, we've been selected to supply equipment for paper mills, lumber and composite board plants across Canada and around the world. Our sales and applications engineers are ready to put our experience to work on your next application - whether it's basic equipment or one of our fully pre-packaged turnkey systems.

For more information about our suppliers and links to their sites click here.

Chemical Handling Pumps - Mechanically Sealed

ProductFlows ToHeads ToComments
Sundyne
Centrifugal API process pumps
1,000 GPM
(227 m3/hr)
15,000 ft
(4,570 m)
Specialists in low flow, high head and working pressure, low NPSH.
PumpWorks 610, PumpWorks Industrial
API and ANSI centrifugal pumps
16,000 GPM
(3,600 m3/hr)
7,100 ft
(2,160 m)
Horizontal single and multi-stage, vertical inline, and vertical multi-stage sump and canned pumps for all services.
Dean
Heat transfer pumps, high temperature
3,100 GPM
(704 m3/hr)
800 ft
(244 m)
To 850°F (454°C), 600°F (315°C) with no cooling.
Wernert
Armoured plastic process pumps
13,200 GPM
(3,000 m3/hr)
400 ft
(122 m)
Corrosion and abrasion resistance, for high chloride, acid and other services.

Chemical Handling Pumps - Seal less

Product Flows To Heads To Comments
Sundyne Ansimag
Non-metallic lined sealless (ANSI)
5,000 GPM
(1,136 m3/hr)
700 ft
(213 m)
Offered in alloys and non-metallic meterials. API, ANSI, self-priming and high-pressure designs.
Sundyne HMD Kontro
Metallic sealless (API 685)
5,000 GPM
(1,136 m3/hr)
700 ft
(213 m)
Offered in alloys and non-metallic meterials. API, ANSI, self-priming and high-pressure designs.
Milton Roy, LMI, Williams, Proteus
Reciprocating, diaphragm pumps
16,000 GPM
(60 m3/hr)
20,000 psi
(137,000 kPa)
Sealless plunger process pumps.
Blackmer
Rotary vane magnetic drive
335 GPM
(76 m3/hr)
150 psi
(1,033 kPa)
Dry run capability - ideal for self-priming/line stripping.

Chemical Injection and Metering Pumps

Product Flows To Heads To Comments
Milton Roy, LMI, Williams, Proteus
Reciprocating, diaphragm pumps
16,000 GPH
(60 m3/hr)
20,000 psi
(137,000 kPa)
Sealless plunger process pumps.

Progessing Cavity Pumps

Product Flows To Heads To Comments
NOV 1,025 GPM
(233 m3/hr)
1,500 psi
(10,300 kPa)
All materials and configurations. Replacement parts for other manufacturers.

Rotary Pumps

Product Flows To Heads To Comments
Blackmer
Positive displacement, rotary vane
2,300 GPM
(525 m3/hr)
200 psi
(1,400 kPa)
Excellent for low or high viscocity, self-priming.
Leistritz
Twin and three screw
10,000 GPM
(2,270 m3/hr)
2,275 psi
(15,700 kPa)
For crude oil, fuel, oil, viscous and multi-phase liquids.

Air Operated Diaphragm Pumps

Product Flows To Heads To Comments
Graco 275 GPM
(62 m3/hr)
200 psi
(860 kPa)
Wide product offering, improved efficiency, best air valve in the industry

Fuel Oil Pumps

Product Flows To Heads To Comments
Blackmer
Positive displacement, rotary vane
2,300 GPM
(525 m3/hr)
200 psi
(1,400 kPa)
Also excellent for paint, solvents and general transfer services.
Leistritz
Twin and three screw
10,000 GPM
(2,270 m3/hr)
2,275 psi
(15,700 kPa)
For fuel oil, lube-oil and other transfer services.

High Pressure Pumps

Product Flows To Heads To Comments
FMC Technologies
Piston and plunger pumps
585 GPM
(133 m3/hr)
10,000 psi
(68,910 kPa)
Standard & API designs
Sundyne
Centrifugal API process pumps
1,000 GPM
(227 m3/hr)
15,000 ft
(4,570 m)
Specialists in low flow, high head and working pressure, low NPSH.
Sundyne Sunflo
Single stage high speed
600 GPM
(36 m3/hr)
5,500 ft
(1,676 m)
Low NPSH, low flow, high heads and working pressures.
Milton Roy, LMI Williams, Proteus
Reciprocating, diaphragm pumps
16,000 GPH
(60 m3/hr)
20,000 psi
(137,000 kPa)
Sealless plunger process pumps.
PumpWorks 610, PumpWorks Industrial
API and ANSI centrifugal pumps
16,000 GPM
(3,600 m3/hr)
7,100 ft
(2,160 m)
Horizontal single and multi-stage, vertical inline, and vertical multi-stage sump and canned pumps for all services.

General Water Services

Product Flows To Heads To Comments
Pentair Fairbanks Nijhuis & Aurora
Split case and end suction (horizontal and vertical)
75,000 GPM
(17,000 m3/hr)
700 ft
(213 m)
Wide selection of effecient sizes, oversized shaft and bearings for long life.
Pentair Fairbanks Nijhuis, Layne/Vertiline
Vertical turbine and propeller pumps
1,000,000 GPM
(227,000 m3/hr)
7,000 ft
(2,133 m)
Open and enclosed lineshaft, settings to 700 ft (250 m)
Pentair Hydromatic
Submersible non-clog, grinder, self-priming
800 GPM
(182 m3/hr)
230 ft
(70 m)
Up to 10", electric or engine drive
Grundfos
Submersible turbine pumps
1,000 GPM
(230 m3/hr)
2,300 ft
(700 m)
Corrosion resistant materials, motor sizes to 500 hp. Well sizes 4 inch and larger

Boiler Feed and Condensate Pumps and Systems

Product Flows To Heads To Comments
Pentair Aurora
Regenerative turbine pumps
150 GPM 700 ft Large Canadian inventory for immediate delivery.
Grundfos
Submersible turbine pumps
1,000 GPM
(230 m3/hr)
2,300 ft
(700 m)
Corrosion resistant materials, motor sizes to 500 hp. Well sizes 4 inch and larger
Sundyne Sunflo
Single stage high speed
600 GPM
(36 m3/hr)
5,500 ft
(1,676 m)
Low NPSH, low flow, high heads and working pressures.
PumpWorks 610, PumpWorks Industrial
API and ANSI centrifugal pumps
16,000 GPM
(3,600 m3/hr)
7,100 ft
(2,160 m)
Horizontal single and multi-stage, vertical inline, and vertical multi-stage sump and canned pumps for all services.
Packaged condensate/boiler systems with tanks, controls and accessories as required as required Several configurations available, receiver sizes to suit system requirements.

Fire Water Pumps

Product Flows To Heads To Comments
Pentair Aurora, Layne/Verti-Line Fairbanks Morse
Horizontal and vertical turbine fire pumps and packaged systems
7,500 GPM
(1,703 m3/hr)
580 ft
(175 m)
UL / ULC / FM approved horizontal and vertical, electric and diesel drive, c/w all accessories, piping, instrumentation and controls.

Air Compressors, Process Gas Compressors, Blowers and Vacuum Pumps

Product Flows To Heads To Comments
Blackmer
Reciprocating compressors
120 CFM
(3.4 m3/min)
600 psi
(4,135 kPa)
Rugged lubricated and non-lubricated designs, ideal for booster/vapor recovery services.
Garnder Denver Nash*, Garo*
Liquid ring vacuum pumps and compressors process and vapour recovery (API 681)
23,000 CFM
(39,000 m3/hr)
150 psi
(1,034 kPa)
Turnkey packages for process vacuum and compression.
Garnder Denver Hoffman Lamson*
Centrifugal blowers, exhausters, engineered vacuum systems
41,000 CFM
(70,000 m3/hr)
23 psi
(158 kPa)
Turnkey packages for process vacuum and compression.
Quincy*
Air compressors, vacuum pumps, dryers instrument air packages
1,500 CFM
(43 m3/min)
500 psi
(3,450 kPa)
Reciprocating and rotary screw with lubricated and oil-free designs.
Kobelco*
Rotary screw, oil free compressors
2,400 CFM
(4300 m3/hr)
150 psi
(1034 kPa)
Fixed speed or VFD operation, patented high-efficiency rotor design. PLC controls for plant DCS integration.
Parker Zander*
Compressed air filtration, drying systems oil/water separation
as required as required Advanced technology, energy saving systems

Specialty Equipment

Product Flows To Heads To Comments
Milton Roy Mixers
Side entry mixers
up to 1.3M BBL
(200,000 m3)
  For storage and blending. Mixer equipment with 4 bladed Sabre® Impeller.
Charlatte*
Hydropneumatic vessels
26 to 40,000 gallons
(100 to 151,200 L)
  Surge protection vessels designed to ASME and NSF61
Abel*
Hydraulic piston membrane pumps
2,650 GPM
(600 m3/hr)
3,625 psi
(25,000 kPa)
For heavy sludge transport and filter press feed application. Solids Handling Pumps for dewatered sludge / cake transfer

*Representation excludes some provinces, please contact your local representative